PLEASE ALLOW "UP TO" A 3 WEEK LEAD TIME 

Often Imitated, Never Duplicated.

INSTALLATION GUIDE

Let us preface by boldly stating this is NOT a universal product, but rather handcrafted to fit the Volkswagen MK7/MK7.5 GTI - Golf R - GTD accurately and specifically. Isn't that such a refreshing statement? Gone are the days of universal parts that yield lackluster results. This product DOES NOT fit the standard Golf TSI or TDI.

The V2 Spoiler extension for the Volkswagen MK7/MK7.5 GTI-R-GTD is larger with a more aggressive profile vs our original/ever so popular release that has been a staple aftermarket product amongst the MK7/7.5 Golf community since 2018.

WHATS INCLUDED?
  • Installation Guide
  • aerofabb ® V2 Rear Spoiler Extension
  • Black Anodized Countersunk Finishing Hardware
  • 3M VHB Mounting Tape (Pre-Installed)
  • 3M VHB Adhesion Promoter Pen
GOOD TO KNOWS!
  • More aggressive profile vs previous version
  • Utilizes the same mounting locations as previous version
  • 1" taller towards corners/.25" taller in center vs previous version
  • Double sided chamfer on trailing edge, and pocket recess for countersunk finishing washers.
  • Scratch resistant
  • Fits Years 2015-2020 (GTI, Golf-R, Rabbit, GTD)
  • Designed & CNC Machined In-house
  • Double sided chamfer on trailing edge
  • Pocket recess for countersunk finishing washers
  • Precise Fitment
  • Superior edge finish
  • 2.25" extension height at tallest point
  • High Gloss Black Surface Finish
  • Pre-drilled Mounting Holes
  • Mounts to underside of Factory Spoiler
  • Precise Third Brake Light Contour Relief
Don't get it twisted, literally...

There's a reason we don't use metal! Pure Aluminum and/or Aluminum Composite panels, also known as ACM "Sign Making Material" (Polymetal, Alubond, Dibond, Alumilite, etc). What happens to metal when it bends? What happens to painted or powder coated surfaces when it comes in contact with road debris or unfortunate mishaps? It twists, creases, or chips under stress and worst of all, it stays like that. Save that wavy bacon for your plate at breakfast!

There's also a valid reason we do not use nut inserts like "Well Nuts" or "Rivet Nuts" for this specific application. It may seem like an overall easier approach however, oversizing holes 1.5x's-3x's larger than the fastener in order to install these nut inserts poses a serious issue. Fatiguing delicate plastic on the underside of the Factory Spoiler which will cause cracking and chipping of the material, paint, or both. Some of these options even require you to utilize specific tooling to install the nut portion which is costly and tough to gauge force squeezing into place. The other obvious yet often overlooked issues would be the GAPING holes and/or permanent Rivet Nuts left in place if you ever decide to remove the product for any reason.

Our fastening method is tried and proven resulting in the MOST secure holding power and LEAST amount of "irreversible damage" vs other fastening combinations disguised as "better" and "easier solutions" on the market.

We Are Innovators

We are proud to say that we were the first to develop a product with such a unique design and mounting location.

Hidden behind their photos

Its all in the details up close... Don't be fooled by inferior COPIES on the market made from lesser materials like aluminum which requires inconsistent paint or powder coating that WILL crease and chip, or even low grade plastics with subpar surface textures, edge finishes, and overall poor fitment. Nothing beats the original and it shows!

Simplicity

Nothing fancy here! Just a clean and unique add-on designed to flow seamlessly with your Factory Spoiler and Piano Black Side Fins.

Rear Spoiler Construction

The aerofabb ® V2 Rear Spoiler Extension is constructed from a thick, durable, High Impact Plastic and comes in a High Gloss Black Finish. Every aerofabb ® Rear Spoiler Extension includes a factory installed logo badge. We then take it a step further by creating a recessed pocket for the badge and hardware to mount.

Installation

Installs with common hand tools and comes with detailed easy to read instructions. All holes are pre-drilled precisely where they need to be and ready for you to mount using the supplied High Tensile Anodized Aluminum Countersunk Hardware.

aerofabb V2 Rear Spoiler Extension (VW Mk7+ GTI - R - GTD)

Shipping calculated at checkout.

Shipping rates and applicable discounts are applied during checkout.

$ 215.00
$ 215.00
Out of stock
SKU: VW-MK7-MK7.5-GTI-R-V2-SPEN/A

HURRY! ONLY LEFT IN STOCK.

Reviews
Sunday,Monday,Tuesday,Wednesday,Thursday,Friday,Saturday
January,February,March,April,May,June,July,August,September,October,November,December
Not enough items available. Only [max] left.
Add to WishlistBrowse WishlistRemove Wishlist
×

Terms and Conditions Acknowledgement

By continuing with your purchase, you agree to our Terms and Conditions, which include our Refund Policy, Privacy Policy, Shipping Policy, and Terms of Service.

By clicking "Agree," you acknowledge that you have read, understood, and agree to all the terms and conditions outlined in these policies.

Shopping cart

Your cart is empty.

Return To Shop

Add Order Note Edit Order Note
Estimate Shipping
Add A Coupon

Estimate Shipping

Add A Coupon

Coupon code will work on checkout page

aerofabb V2 Rear Spoiler Extension (VW Mk7+ GTI - R - GTD)

$ 215.00